Specific Operation Instructions:

1. Regeneration Operation When The Tip Temperature Is 300 °c~360 °c.
2. Let The Soldering Tip And The Resurrection Cream Repeatedly Rub For a Few Seconds.
3. Clean The Tip With Solder Sponge Or Copper Wire.
4. Plated With a New Solder Wire Layer, The Soldering Tip Can Be Clean And New.

If The Effect Of The Regeneration Is Not Obvious, Repeat The Steps 3-4 Times Until The Desired Effect Is Achieved, And Then Apply a New Solder Wire Layer.

Why Use Refresher To Remove Oxide Layers?

1.The Removal Of Oxide Layer Is Effective.
2.The Damage Is Small.
3.Protective Iron Head Alloy Layer
4.Simple And Convenient