Description

INOV8 3DX X-Lite Body Mount Spacer (2 Heights)

Introducing our 3DX Body Mount Spacers specially developed for the new Avalon Vortex Bodyshell. They are 3D Printed from tough and lightweight ASA Material to keep maximum durability and minimum weight as such a crucial part of your bodyshell.

With the Avalon Vortex Wing Struts being so high, we had to find a solution to allow enough length on the body mounts to position the body at the correct heights. Rather than making all new carbon extensions for one body, we decided to develop these spacers which can be used with the original extensions everyone already owns!

We have developed 2 versions, 10mm and 15mm. 10mm is more common for those running less rake (more likely in the stock class) and 15mm for more rake (more likely in modified class). They can be re-used from body to body!

This spacer is designed for use solely with the INOV8 X-Lite Body Mount, as it locates perfectly to the top of the mount to ensure everything stays in line.

Note: Using this spacer requires a 10 or 15mm longer screw than usual, so ensure you prepare a screw of this length for installation. We suggest a titanium screw for minimum weight, whilst still being strong enough to support the bodyshell sufficiently.

Includes: 2x 3DX X-Lite Body Mount Spacers (10 or 15mm) – enough for 1 bodyshell

Installation: Install above body mount with the arrow facing the front of the bodyshell. The bottom of the spacer should locate nicely onto the top of your body mount.