TEAM POWERS Radon Pro V5BT (1S, 200A)

Improvements based on Radon Pro V4.1(1S):

Hardware:

* BEC with max ~10A output at 6V instead of ~3A in V4.1(1S)

* Change to 32-bit MCU with ultra-smooth, faster response with precise throttle and braking control. More top end power with the same item function setup when compared with Radon Pro V4.1.

* New PCB layout and new internal hardware design increase the heat dissipation and should be around 10’C lower than radon pro v4.1 working on the same condition. The speed control cooling fan can be removed when running small to medium track for modify/stock racing.

* Connect with external Bluetooth device for advanced programming and firmware update through the Mobile APPS. APPS will be available on both IOS and Android.

* Real Time Data Analysis through Mobile APPS(Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing)

* Built-in one touch On/Off switch and support external On/Off switch.

Software:

* It is a new developed software with more advanced item functions added. Each item have small step to fine tune.

* All update item functions information can be reviewed from the photos attached.

Apps Connection with Speed Control Demo Link:

Specs:

* Controls: Forward/Brake/Reverse

* Input Voltage: 1S lipo

* BEC: 6V/7.4V selection/max ~10A @6V

* Motor Limit: 3.5T or over

* Max current: ~200A per phase

* Size: ~38x30x15.6mm

* Weight: ~38g (not include wiring and fan)