NOBLE NB4+ SURFACE RADIO

TRANSMITTER SYSTEM w/ Receiver(FGR4B) Adjustable Left or Right handed [FLYSKY] FS-NB4+

FLYSKY Noble NB4+ Surface Radio

This product uses the 2.4GHz Third Generation AFHDS 3 protocol. The Noble NB4+ transmitter and FGr4B receiver constatute a system, compatible with model cars, boats and other models. and it also supports the USB simulator function (Default enabled).

System Features

AFHDS 3 (third-generation automatic frequency hopping digital system) is a newly developed digital wireless system. It is compatible with single antenna bidirectional real-time data packet transmission and data stream transmission. With the advantages that come with the WS2A wireless system and the new 2.4GHz chip, the system can dynamically set: number of channels, channel resolution, range, anti-interference requirements and latency to meet the needs of different users.

The Noble NB4+ has 2 batteries, one located in the handle and one in the removable base.
To attach the base:
1. Line up the base so that the transmitter handle has a slight over hang on the back.
2. Carefully insert the base contacts into the hole in the bottom of the handle.
3. Hold the handle firmly and pull the battery backwards. When it is secure you should hear a click.

BEGINNER

The beginner mode is suitable for entry level players to improve the safety of
operations by limiting the amount of throttle servo.
This function is hidden by default. You need to enable it manually.
Setup:
1. Go to the [Custom Main Menu] menu under the [MODEL] menu bar, and select
the [Beginner] check box. After selection, this function is displayed on the menu
interface.
2. Find the function in the menu and click to enable this function. When this
function is enabled, the icon will change to .Assign SW controls to enable/disable the beginner function.

Noble NB4+ supports three function modes: Trainer, Student and H Track. Transmitters
set to Trainer or H Track Mode accept external signals to control the model, that is, the
trainer interface or head tracker interface has the ability to recognise external PPM
signal input. Transmitters set to Student Mode only output PPM signals and do not
recognise the input signals.
Two transmitters (one for Trainer mode and one for Student mode) can be connected
via a double-ended Type-C cable to realise the coach function.
One transmitter (H Track mode) can be connected to the headset via head tracker
cable to realise the head tracker function.

Receiver Specifications (FGr4B)